7*24小时服务热线:0313-5065766 0313-5065755

  • 张家口汇德冶金材料有限公司
  • 地址:河北省张家口市宣化区顾家营镇徐家房村
  • 电话:0313-5065766 0313-5065755
  • 手机:15832338333 13784593125
  • QQ:1079516905
  • Email:zjkhdyjcl@163.com
  • 传真:0313-5065755
  • 铁包覆盖剂位置:首页 > 产品中心 > 铁包覆盖剂

    铁包覆盖剂

    高炉出完铁水后,如果覆盖剂达不到使用要求,可能对炼钢工序生产带来影响:

    1、温度

    铁水由于覆盖剂保温效果差,造成铁水温度损失大,降低入炉冷料加入量。影响转炉炼钢生产和钢铁料消耗控制。

    2、结壳

    铺展性差会造成铁包结壳,结冷料,影响炼钢脱硫、扒渣工序,同时清包困难,降低铁包使用寿命。

    3、环保

    普通产品使用过程中产生的烟气量大,污染严重。

    我公司生产的铁包覆盖剂选用优质原材料,采用先进工艺,产品颗粒均匀,铺展性好,能够迅速均匀覆盖在铁水表面,起到隔热保温作用,使用过程中产生的烟气量小,无结壳现象,有良好的使用效果,并满足环保要求。

    使用量:0.8-1.2Kg/t

    理化指标:

    SiO2%

    CaO%

    MgO%

    Fe203%

    Al203%

    C%

    熔点℃

    46.0±6.0

    20.0±6.0

    ≤11.0

    ≤6.0

    ≤18.0

    ≤10

    1250±50

    粒度:0.2-1.0mm,球型空心颗粒;

    包装:干燥,防水包装,10kg/袋,吨袋。可按要求进行包装。

    Iron Ladle Covering Agent

    After the smelting of molten iron in a blast furnace is finished, in case the covering agent fails to meet relevant requirements, it may bring the following impacts on steelmaking:

    1. Temperature

    Due to poor thermal insulation effects of covering agents, molten steel has large temperature loss, which lowers the addition of cold metals in a converter and affects converter steelmaking and steel consumption control.

    2. Skull

    Poor spreadability will cause iron ladle skull and cold metal, which affects steelmaking desulfuration and slagging-off procedures, causes difficult ladle cleaning and lowers the service life of iron ladles.

    High-quality raw materials and advanced atomizing technology are used for our iron ladle covering agents. Such products have even and uniform particles as well as favorable spreadability, which can be rapidly and evenly covered on the surface of molten steel to perform thermal isolation, eliminate skull so as to meet relevant desired effects.

    3. environmental protection

    The smoke and gas produced in the process of ordinary product use is large and the pollution is serious.

    My company production of iron package cover agent selects the high quality raw materials, the use of advanced technology, product uniform particles, good spreadability, can quickly evenly covering the surface of hot metal, the heat insulation effect, occurring in the process of using the smoke volume is small, no crusting phenomenon, has the good use effect, and meet the requirements of environmental protection.

    Amount: 0.8-1.2Kg/t

    Physical and chemical indicators:

    SiO2%

    CaO%

    MgO%

    Fe203%

    Al203%

    C%

    Melting point ℃

    46.0±6.0

    20.0±6.0

    ≤6.0

    ≤6.0

    ≤18.0

    ≤10

    1250±50

    Particle size: 0.2-1.0mm, spherical hollow particles;

    Packaging: Dry and water-proof packing, 10kg/bag, ton bags. And we can perform packaging as per

    customers’ require ments.